How To Plant Trees and Shrubs in Residential Fill

Q. We recently purchased our house and are in the process of installing our backyard.  Currently we are digging trenches for irrigation lines and very quickly finding out that this so called "soil" is in fact construction infill.  The "soil" is comprised of dusty dirt and filled with rocks.  Our landscape plans comprise of a small turf patch for our 1 year old daughter and our 3 year old dog, perimeter landscaping and a 18" wall off our patio for a small herb garden. We are have a very small yard and the finished landscape area, where soil will be placed, is only 365 sf.  What do you recommend that we use in our yard to amend the infill and turn it into useful soil?  And how much will we need?

A. What you are describing is pretty common in most urban residential settings in planned communities. This fill will be okay for unplanted desert "flooring" of your landscape but will need to be replaced if you are planting in the ground. Use Viragrow Garden Soil. It is cost effective and has plenty of fertilizer packed into it.

Viragrow Garden Soil is the base Viragrow uses for all soil mixes like Tomato Lady. It is full of fertilizer value and ready to plant.

I don't know of another company in town that would have anything this good for that purpose. You could also use soil mixes for doing the same thing but I think they'll be more money. If you do any elevation changes to your landscape make sure that water will collect in your landscape in low spots and not enter the home if there is a heavy downpour. 

Residential yards are required to have positive drainage from the backyards to the city streets and ultimately into storm sewers. This is to prevent this kind of thing from happening during the storm so make sure you contour/elevation change so water does not enter your home.

If you are not doing any elevation changes and planting directly into this fill, I would excavate this fill to these depths for the following planting areas: 

• flowerbeds and vegetable beds 12 to 15 inches
• small shrubs and groundcovers 12 to 15 inches 
• larger trees and shrubs 18 to 24 inches 
• fruit trees 18 to 24 inches 
• lawns 12 to 15 inches 
• vines 12 to 15 inches

Basically the larger the plant, the deeper you should excavate to accommodate its roots.

Planting holes for woody plants should have a width 3 to 5 times their depth. If you can remove rocks from this fill larger than a golf ball and have enough soil remaining than I would mix the soil 50-50 with straight compost for planting. 

When planting trees and shrubs, backfill around the roots with Viragrow Garden Soil. You will not need to fertilize for two years!

If it is mostly rock and you don't have much soil left then I would bring in a soil mix such as the Viragrow Garden Soil mix. This is a soil mix of silica sand and compost.

The amount you will need is a little bit tricky. You would need 12 yards to fill an area about 350 square feet to a depth of 12 inches. I'm not saying that you need to order this amount but this should give you some idea of your starting point and worst case scenario.

Order 100% or straight compost if you can mix it 50/50 with native desert soil. If you cannot mix it then I would order Viragrow's Garden Soil mix as a general mix for planting all of your woody plants and lawn. You can always add extra ingredients to this mix for your vegetable garden area or your flowerbeds.